FAQ About Troubleshooting
When is 600 series stainless a better choice than 304 series stainless?
Often wear resistance on stainless steel chains is an important consideration. Our PHSS series chain (600 series stainless) has a 50% higher working load than 304 series chain due to the heat treatment of the round parts in the chain – the pins, bushings and rollers. The harder surfaces provide greater wear resistance for popular use in food equipment, lightweight equipment for fruit and vegetable processing, and industrial equipment. Keep in mind that same elements used to enhance the wear resistance of 600 series stainless steel slightly decrease the chain’s resistance to corrosion. Consult with our engineering department for clarification as to specific assistance for your application.
We are using chains in pairs on our application. Can you provide chains in pairs that are matched to one another?
When chains are used in pairs or even in sets of three or more strands, we can provide chains in pairs in two methods. If the chains have attachments on them, we can provide the chains so the attachments line up with one another in the strand length. Please specify this requirement at the time of ordering. A second technique is to provide the overall length of the two (or more) strands to a “matched length” where the chain strands are literally measured. Then the chain strands are supplied accurately to one another with tighter tolerances between the pair or set of chains. Please specify the tolerances necessary at the time of the inquiry/order.
When is 600 series stainless a better choice than 304 series stainless?
Often wear resistance on stainless steel chains is an important consideration. Our PHSS series chain (600 series stainless) has a 50% higher working load than 304 series chain due to the heat treatment of the round parts in the chain – the pins, bushings and rollers. The harder surfaces provide greater wear resistance for popular use in food equipment, lightweight equipment for fruit and vegetable processing, and industrial equipment. Keep in mind that same elements used to enhance the wear resistance of 600 series stainless steel slightly decrease the chain’s resistance to corrosion. Consult with our engineering department for clarification as to specific assistance for your application.
If my application is using carbon steel chain, can I switch to a stainless steel chain without any loss in tensile strength or wear life?
Carbon steel components are all heat treated. 304 series stainless steel chains are not heat treated, therefore the wear surfaces of the pins and bushings (known as the bearing area of the chain) are softer than their carbon steel counterparts. This softer surface will reduce in a lower tensile strength but more importantly, there will be less wear resistance on a 304 series chain versus its carbon steel counterpart. A simple switch from 50 riveted roller chain to 50 stainless steel roller chain will not result in equal wear resistance. Consult with our engineering department for assistance in these types of circumstances to assist with the best selection.
How do I identify C2062 roller chain with K2 attachments from photos?
C2062 roller chain with K2 attachments can be identified by seeing tabs on both sides of the chain with 2 holes on each tab.
How do I convert ANSI roller chain sizes to ISO metric equivalents (#125 ↔ 08A)?
ANSI #125 ≈ ISO 08B; convert by pitch (inches × 25.4 = mm).
What roller chain handles 1500°F high-temp steel billet applications?
Use C2102 316 stainless roller chain for high-temp steel billet conveyors.
How do I prevent corrosion on PEER ProCoat roller chain in humid environments?
Apply anti-corrosion marine grease to ProCoat chain for humid outdoor use.
What SS316 chain matches 3.74mm pitch for dental device use?
Use micro stainless or 04B-1 chain for dental applications (SS316).
What are the temperature limits for PEER 50R roller chain (Q series)?
PEER 50R Q roller chain operates from -10 °F to 250 °F; use ProCoat or stainless for higher temps.
What’s the difference between 2050 D-3 E2LP and E8LP chain extension pins?
E2LP/E8LP = same 2050 D-3 chain with different pin lengths.
What chain suits light outdoor pool cover mechanisms (~500 N load)?
Use #35–#41 stainless roller chain for pool cover systems.
Best chain type and lubrication for dusty environments (cat litter plants)?
Use sealed #100 chain with dry film lubricant for dusty plants.
What master link fits a 2008 Ford Edge V6 secondary drive chain?
Automotive timing chains require OEM master link kits (not industrial).